Signet International

Deep Grove Ball Bearings


Deep Grove Ball Bearings - 01 Deep Grove Ball Bearings - 02

We are amongst dominant manufactures of Deep Grove Ball Bearings based in India. We proffer reasonable prices on our noteworthy deep grove ball bearings. Our distinguished deep grove ball bearings are wide accepted by our esteemed clients.

Single row deep groove ball bearings accomo­date radial and axial loads and are capable of operating at high speeds. Because of these capabilities and their competitive price, they are the most commonly used bearing type. The misalignment capacity of deep groove ball bearings is limited therefore the alignment of the bearing locations must be carefully con­trolled.
Double row deep groove ball bearings of the FAG Standard Programme have no filling slots. Contrary, to their former design they can carry axial loads in both directions. The cage of these bearings is of glass fibre reinforced polyamide 66, which will withstand constant temperatures of 120°C and can operate several hours at temperatures of up to 150°C, over short periods even at temperatures of up to 180°C. The bearings are filled with grease. Double row deep groove ball bearings are not suitable when angular misalignments are to be accommodated.

China Wafangdian GWG Bearing Manufacturing Co., Ltd. are specialized in manufacturing bearings, rolling bearing, steel ball bearing with strong design capability. GWG Bearings have four factories and three sales offices. The are bearing factory, roller factory, cage factory, forging factory and sales office in Dalian, Wuxi and Ningbo. Wuxi and Ningbo offices mainly serve the domestic markets, and Dalian office serves the international markets. We mainly make medium and large rolling bearings, capability range from medium bearings with inner diameter of 120mm to large bearings with outer diameter of 3000mm. In addition to our GWG brand, GWG Bearings also provide OEM service and supply non-standard products, rolling bearing, steel ball bearing, sealed bearing, miniature ball bearing, small ball bearing, ceramic ball bearing, deep groove ball bearing, stainless steel ball bearing, Large Deep groove ball bearings, Large diameter Deep groove ball bearings, Custom Deep groove ball bearings, Large size Deep groove ball bearings for special applications.

Feature
They are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required.

Cages
Deep groove ball bearings generally use pressed cages of steel sheet or brass cages. When the outer diameter is less than (inclusive)400mm, they use pressed cage with steel sheet. When the outer diameter is bigger than 400mm,they use brass cages.

Applications
Can be found in automobiles, machine tools, motors, instruments, construct machines, railway vehicles, agricultural machines and various other special machines

Types
Basic type, With snap ring groove on the outer ring(-N),With one shield(-Z) on one side or two shields(-2Z) on both sides, With one seal(-RS)on one side or two seals(-2RS)on both sides.



Principal dimensions(mm)

Designations D D B
16030M 150 225 24
6030 150 225 35
6030/C9 150 225 35
6030M 150 225 35
6230 150 270 45
6230M 150 270 45
6330 150 320 65
6330M 150 320 65
16032M 160 240 25
6032 160 240 38
6032/C9 160 240 38
6032M 160 240 38
6232 160 290 48
6232M 160 290 48
6332M 160 340 68
733 165 250.5 35
61834M 170 215 22
61934M 170 230 28
16034M 170 260 28
6034M 170 260 42
6034 170 260 42
6034Q 170 260 42
6234 170 310 52
6234M 170 310 52
6334 170 360 72
6334M 170 360 72
61936M 180 250 33
63936X1M 180 259.5 52
6036 180 280 46
6036M 180 280 46
6236 180 320 52
6236M 180 320 52
61838M 190 240 24
61938M 190 260 33
61938X1M 190 269.5 33
16038M 190 290 31
6038M 190 290 46
6038 190 290 46
6238 190 340 55
6238M 190 340 55
16040M 200 310 34
6040M 200 310 51
6040 200 310 51
6240 200 360 58
6240M 200 360 58
61944M 220 300 38
61944X1M 220 309.5 38
6044 220 340 56
6044M 220 340 56
6244 220 400 65
6646M 230 329.5 40
61948M 240 320 38
6048M 240 360 56
6048X1M 240 359.5 56
6248 240 440 72
61852M 260 320 28
61952M 260 360 46
752 260 370 46
62952X1M-1 260 369.5 60
6052M 260 400 65
61956M 280 380 46
61956X1M-1 280 390 46
6056 280 420 65
61960X1 300 419.5 56
61960 300 420 56
16060/HA 300 460 50
6060 300 460 74
6064 320 480 74
61864F3 320 400 38
864 320 412 38
61964 320 440 56
61968 340 460 56
61872 360 440 38
6072F1 360 540 82
61876F1 380 480 46
61976 380 520 65
61980F3 400 540 65
6080F1 400 600 90
61984F1/C9 420 560 65
61984F1 420 560 65
61988F3 440 600 74
6088 440 650 94
61922F3 460 620 74
619/500X3F1 500 660 75
60/500 500 720 100
60/560N1MAS/C9 560 820 115
160/800X2F1 800 1150 115
618/850 850 1020 82
618/1000F1 1000 1220 100
618/1180F1 1180 1420 106
618/1240X1 1240 1480 112
To enquire about the desired product(s), just check the box and then click “Enquiry Now” button which is provided below.